Qilu water paint new beautiful interior wall latex paint

 

1 product introduction: this product is a kind of engineering special interior wall latex paint, using high quality acrylic emulsion. High-grade color filler. Imported additives. Refined from. Environmental protection interior wall engineering paint.

 

2 Product features:

 

. Whiteness is good.

 

. High covering rate. Smooth feel.

 

. Add 30-40% water for the first spraying and 15-20% water for the second rolling coating.

 

. Low VOC and no heavy metals.

 

3 Scope of application:

 

. The surface of the coating should be flat. Solid without loosening. Powder. Skin peeling. Cavity on the surface. The uneven part of the crack is filled with mortar putty. Grind and smooth.

 

. The wall maintenance period is generally: cement mortar surface more than a week in summer. More than two weeks in winter. Cement gypsum board construction in summer if the wall is too dry. Wet and then paint before construction. The pH is below 10.

 

. The construction temperature is generally required to be above 5℃. Brush figure two. Repaint interval of more than 2 hours.

 

. Paint should be stirred well before use. If the paint is too thick, dilute it with running water.

 

. This paint must not be mixed with any organic solvents.

 

. If there is paint on the original wall. Use special primer to seal before construction. Brush again to prevent the film from falling off.

 

. This product should be stored between 5℃ and 35℃. Strictly prevent freezing and exposure to the sun.

 

Construction instructions:

 

. Brush coating. Spraying. Roller coating. Airless spray.

 

4. Packing specifications and storage:

 

. Packing specification: 20KG

 

. Storage condition: Stored in 5℃-35℃ environment.

 

5 Safety Rules:

 

. Avoid the splash of latex paint in your eyes. If splashed into the eyes, it should be immediately cleaned with water.

 

6. Execution standard:

 

GB/T9756-2018GB18582